Day 8 and another screw loose

Yesterday’s dose of ATF in the gearbox didn’t seem to make a lot of difference so before setting off I checked the oil. There wasn’t any, it was all in the drip tray under the engine and gear box. After a bit of a panic I looked at it logically and found that the drainplug under the geear box had unscrewed it self and was also in the drip tray. Screwed it back in with some ‘plastic gasket’ gunk and set off again to buy more ATF. Fortunately thw mooring is about a 15 min walk from a retail park with a Halfords.

The river through the wash lands is wide. Therefore shallow and weedy. Halfway to Northants city centre and the prop is fouled again. As before there’s no where to moor so I crept on until I saw a guy on a residential boat moored in a little backwater. He let me tie up alongside while I untangled the prop. Then in to town and stopped for lunch at the embankment.

Just one more river lock before the narrow canal so took off the fat fenders and fitted some skinny ones.

The canal locks seem tiny after the Gt Ouse and Nene and need a whole different technique, especially being single handed. The first one has CRT padlocks on one side that don’t work, fortunately the paddles on the other side were unlocked. Quite a few more after that had broken locks, but also broken locking mechanisms so they can be used without a key. After #13 the first of the Rothersthorpe flight there are no locks on the locks.

They are still hard work though, I gave up for the day between 10 and 9.

Leave a Reply