Day 1

Well, here we go then. Left Kelpie about 09.30 and nothing much to report. Quite a few boats out including loads of canoes, kayaks and paddleboards. Plenty of rubber dingies and little day boats scudding about. At one lock, I forget which, there was a woman in a little boat with 5 kids from about … Read more »

Day Zero

The grand tour of the North begins tomorrow. The plan is to stop overnight at Earith then tackle the New Bedford down to Salters Lode on Wednesday. The snag with being so far out on a limb on the Great Ouse is that every trip starts the same way so unless something exciting happens the … Read more »

Tracking Seren

A couple of years ago when I went to Llangollen on Seren I had a phone tracker linked to my blog. Since then the app has been shutdown and I’ve changed my phone. So now I have a different app called Hellotracks. This should display where I am, but only when I’m away on Seren. … Read more »

Cockpit Roof (12)

Finishing details are taking an age, I’ve made a bit of progress with the draught proofing, fitting an aluminium strip to the side of the roof frame to cover the edge of the side window. Need to do a lot more, and fit latches to hold the roof down. Meanwhile, when the weather has put … Read more »

Cockpit Roof (11)

Finally fixed the aluminium to the frame this morning. Used up some old silicone sealant left over from various previous jobs and stainless steel screws from my favourite boat chandlers (Ebay). I haven’t weighed the roof but judging by the difficulty I had lifting the old one off and putting the new one on I’d … Read more »

Cockpit Roof(10)

The aluminium sheet is 1.5mm thick, too thick for long cuts cut with tinsnips. 1mm would have been easier to handle but I worried it would sag between the frames, especially if/when someone leans on it. Fortunately I have an old B&D jig saw so I fitted a metal cutting blade to that to cut … Read more »

Cockpit Roof (9)

I collected my aluminium sheets on Wednesday (April 28) and have been working on them since. I’ve glued the first part of a two piece joint strip to the central stringer and as you can see here clamped the edge of the aluminium to it. Then I drilled a row of holes (150mm spacing) along … Read more »

Cockpit Roof (8)

No photos because it doesn’t look much different but the framework is finished and I’ve collected the aluminium sheet to clad it. Just hope the weather is nice and I can get on. Meanwhile I’ve replaced one of the cabin side panels and put a registration number and ‘Seren’ on the side. Have to turn … Read more »

Cockpit Roof (6)

I took a new photo of the starboard stringer today showing how it bends and changes from being edge on at the rear to flat at the front. Since taking the photo I’ve fitted a block between the two stringers shown here. And made a matching stringer for the port side. This roller is mounted … Read more »